henz155 wrote:Klo menurut ane sensor ini jarang rusak oom.mkny sparepartny yidak rede oom.
yup nih sensor jarang bgt rusak..Kalo rusak kyk ane apes2nya aja
Kalo performa rem ya tetep kayak mobil biasa tanpa sistem ABS..jadi kalo panic braking (injak pedal rem penuh) ada kemungkinan roda ngunci (lock)..
dan seumur2 ane kagak pernah merasakan manfaat ABS di jalan raya/tol ( hard braking sambil manuver mbelokkan setir ).. #jangan sampe kejadian lah

Sekedar sharing info aja..ati2 kalo ganti bearing buat mobil ber ABS..ternyata bearing mobil ber ABS ada magnetnya..jadi kalo sampe salah pake bearing yg ga bermagnet dijamin sistem ABSnya ga jalan/malfunction..
Honda city 2004 4 roda udah ada sensor ABSnya semua..
Kutipan mbah wiki mengenai sistem sensor ABS..
Anti-lock braking systems use different schemes depending on the type of brakes in use. They can be differentiated by the number of channels: that is, how many valves that are individually controlled—and the number of speed sensors.[10]
Four-channel, four-sensor ABS
This is the best scheme. There is a speed sensor on all four wheels and a separate valve for all four wheels. With this setup, the controller monitors each wheel individually to make sure it is achieving maximum braking force.
Three-channel, four-sensor ABS
There is a speed sensor on all four wheels and a separate valve for each of the front wheels, but only one valve for both of the rear wheels.
Three-channel, three-sensor ABS
This scheme, commonly found on pickup trucks with four-wheel ABS, has a speed sensor and a valve for each of the front wheels, with one valve and one sensor for both rear wheels. The speed sensor for the rear wheels is located in the rear axle. This system provides individual control of the front wheels, so they can both achieve maximum braking force. The rear wheels, however, are monitored together; they both have to start to lock up before the ABS will activate on the rear. With this system, it is possible that one of the rear wheels will lock during a stop, reducing brake effectiveness. This system is easy to identify, as there are no individual speed sensors for the rear wheels.
One-channel, one-sensor ABS
This system is commonly found on pickup trucks with rear-wheel ABS. It has one valve, which controls both rear wheels, and one speed sensor, located in the rear axle. This system operates the same as the rear end of a three-channel system. The rear wheels are monitored together and they both have to start to lock up before the ABS kicks in. In this system it is also possible that one of the rear wheels will lock, reducing brake effectiveness. This system is also easy to identify, as there are no individual speed sensors for any of the wheels.