XADO Moto - Gel Revitalizant for Small Engines Rp.110.000,- Di JuraganHelm
http://www.juraganhelm.com/product_info ... e3543fac22
XADO adalah Teknologi Cermet (Ceramic Metal) dengan nano technology yang dikembangkan oleh Ukraina.
Product -product XADO buatan Ukraina ini sangat luar biasa bisa menutup baret-baret silinder tanpa perlu membongkar mesin.
Baret-baret dalam silinder adalah proses yang wajar dalam suatu mesin walau kita menggunakan oli sebaik apapun.
Jadi berapapun umur kendaraan kita walau berjalan 5 bulan pasti sudah ditemukan baret2 dalam silinder yang mengakibatkan mulainya loss kompresi dan proses penuaan dalam mesin.
Dengan Teknologi Cermet XADO secara nano technology baret2 silinder ditutup dengan maksimal dan juga lapisan yang dibentuk oleh XADO ini akan sangat kuat sekali, halus sekali, sehingga Kompresi mesin kembali bagus kembali tanpa perlu membongkar mesin.
Performa kendaraan akan sangat bagus sekali dan suara mesin akan sangat halus dikarenakan koefisien gesek Piston dan dinding silinder menjadi kecil sekali
Lapisan XADO memproteksi hingga 100.000 km!!
Designed for wear protection and restoring repair of engines parts of motor technique with working volume up to 1,000 cc.
TECHNICAL CHARACTERISTICS
Main characteristics of metalloceramics coating :
- Microhardness – 750 kgf/mm2
- High corrosion stability
- Roughness Ra up to 0.06 µm
PACKAGE Contains :
3 blisters x 4,5 ml
BENEFITS
It is applied to motorbikes, motorcycle, snowmobiles, water and household motor technique (lawnmowers, chain-saws, etc.). It gives ou triple effect – repair, protection and economy.
* Restores cylinders, eliminates tearing and scratches.
* Increases compression in cylinders.
* Protects friction parts from wear.
* Reduces fuel consumption.
* Increases the engine power up to 100%.
* Prolongs life span of the engine by 2-4 times.
* Decreases amount of harmful exhausts.
* Reduces noise and vibration.
APPLICATION INSTRUCTIONS
For engine with combined fuel and oil system.
Stage 1 : Squeeze out the contents of one sachet into the full fuel tank (it is recommended to dissolve the contents of the sachet in the oil or fuel at temperature above 20 0C). Start the engine and let it idle for 2 minutes. Run the vehicle as usual.
Stage 2 : Repeat Stage 1 when you refill the tank.
Stage 3 : Repeat Stage 2.
For engine with separated fuel and oil system.
Stage 1 : Warm up the engine to the working temperature. Squeeze out the contents of one sachet into the filler of the engine oil tank. Start the engine and let it idle for 2 minutes. Run as usual.
Stage 2 : Repeat Stage 1 after 150-250 km run of a motorcycle or after 4 hours of the engine operation.
Stage 3 : Repeat Stage 1 again after 150-250 km run of a motorcycle or after 4 hours of the engine operation.
Note :
* The compound is equally effective on application for two- and four-stroke engines of any kind.
* Treatment is completed after no less than 1,500 km run or 20 hours of engine operation.
* It is not necessary to change the oil in 4-stroke engines before the treatment.
* The dose should be doubled for the engines more than 1,000 cc in volume.