Koleksi hand tools [Part 13]

Forum untuk mengobrol hal-hal bebas.
Bisa dibuka oleh visitor dan member.

Moderators: r12qiSonH4ji, avantgardebronze, akbarfit, Ryan Steele, sh00t

mkamil
Full Member of Senior Mechanic
Full Member of Senior Mechanic
Posts: 309
Joined: Tue Aug 06, 2019 14:02
Daily Vehicle: 1VD - L15Z - FB25

Re: Koleksi hand tools [Part 13]

Post by mkamil »

bare tool 900rban, bisa hex 1/4 atau sq.d 1/2, sebelumnya kepikiran dongcheng yg murmer :big_grin:
IMG_8787.jpeg
IMG_8788.jpeg
IMG_8821.jpeg
You do not have the required permissions to view the files attached to this post.
Top
DOHC
Full Member of Mechanic Master
Full Member of Mechanic Master
Posts: 27673
Joined: Sat Jan 31, 2009 17:48
Location: in engine bay with carbonfibre as roof

Re: Koleksi hand tools [Part 13]

Post by DOHC »

eikazan wrote: Thu Jun 26, 2025 4:33
marmut wrote: Wed Jun 25, 2025 13:18
eikazan wrote: Wed Jun 25, 2025 12:02
mbah kalo lepas intake wajib ganti gasketnya ga sih? atau gantinya kalo ada indikasi bocor aja stlh dipasang?
kalo gasket cover klep wajib ganti kan ya
pingin bersih2 intake xpander liat gasket di oren sebiji 70ribuan x4 :mky_01:



emang spander ada yg direct injection?
berarti kalo bukan direct injection seumur hidup gak perlu bongkar bersih2 intek manipol ya mbah?
tetep perlu

apalagi kl di cekokin pertalit mulu, atau males gantol
numpang lewat aja.... :ngacir: :ngacir:
Top
henbob
Full Member of Senior Mechanic
Full Member of Senior Mechanic
Posts: 355
Joined: Thu Sep 26, 2019 7:33
Location: BSD-SBY

Re: Koleksi hand tools [Part 13]

Post by henbob »

marmut wrote: Wed Jun 25, 2025 13:16
henbob wrote: Wed Jun 25, 2025 8:50

mobil apaan yak, starlet om? :big_peace:



Suzuki APV
wkwkwk, vw siroko ni :big_grin:
Top
henbob
Full Member of Senior Mechanic
Full Member of Senior Mechanic
Posts: 355
Joined: Thu Sep 26, 2019 7:33
Location: BSD-SBY

Re: Koleksi hand tools [Part 13]

Post by henbob »

mkamil wrote: Sat Jun 28, 2025 6:41 bare tool 900rban, bisa hex 1/4 atau sq.d 1/2, sebelumnya kepikiran dongcheng yg murmer :big_grin:

IMG_8787.jpeg
IMG_8788.jpeg
IMG_8821.jpeg
cakep om, bongkar2 apa lagi om?
Top
mkamil
Full Member of Senior Mechanic
Full Member of Senior Mechanic
Posts: 309
Joined: Tue Aug 06, 2019 14:02
Daily Vehicle: 1VD - L15Z - FB25

Re: Koleksi hand tools [Part 13]

Post by mkamil »

henbob wrote: Mon Jun 30, 2025 4:15
mkamil wrote: Sat Jun 28, 2025 6:41 bare tool 900rban, bisa hex 1/4 atau sq.d 1/2, sebelumnya kepikiran dongcheng yg murmer :big_grin:

IMG_8787.jpeg
IMG_8788.jpeg
IMG_8821.jpeg
cakep om, bongkar2 apa lagi om?
rotasi ban di subie lalu ganti rubber mount damper, rebound stop damper, ganti link stabilizer di honda, ciri khas penyakit honda
IMG_8821.jpeg
IMG_8837.jpeg
IMG_8835.jpeg
IMG_8864.jpeg
You do not have the required permissions to view the files attached to this post.
Top
eikazan
New Member of Junior Mechanic
New Member of Junior Mechanic
Posts: 15
Joined: Mon Feb 12, 2018 16:28
Location: Semarang
Daily Vehicle: Xpander AT

Re: Koleksi hand tools [Part 13]

Post by eikazan »

hentul.jpg
hasil berguru di tret hentul, join kubu biru :mky_08:

tapi dongbu oren, jackstand ijo :mky_07:

pingin nambah tw 40-220nm nanti kalo jadi bongkar kaki2 :mky_01:
You do not have the required permissions to view the files attached to this post.
Apprendre, c’est vivre
Top
DOHC
Full Member of Mechanic Master
Full Member of Mechanic Master
Posts: 27673
Joined: Sat Jan 31, 2009 17:48
Location: in engine bay with carbonfibre as roof

Re: Koleksi hand tools [Part 13]

Post by DOHC »

eikazan wrote: Mon Jun 30, 2025 9:42 hentul.jpg
hasil berguru di tret hentul, join kubu biru :mky_08:

tapi dongbu oren, jackstand ijo :mky_07:

pingin nambah tw 40-220nm nanti kalo jadi bongkar kaki2 :mky_01:
sejauh mata mandang

ga ada ijo2 tekiro


bagus !!!!!!! :big_exellent: :big_exellent:
numpang lewat aja.... :ngacir: :ngacir:
Top
eikazan
New Member of Junior Mechanic
New Member of Junior Mechanic
Posts: 15
Joined: Mon Feb 12, 2018 16:28
Location: Semarang
Daily Vehicle: Xpander AT

Re: Koleksi hand tools [Part 13]

Post by eikazan »

DOHC wrote: Mon Jun 30, 2025 10:40
eikazan wrote: Mon Jun 30, 2025 9:42 hentul.jpg
hasil berguru di tret hentul, join kubu biru :mky_08:

tapi dongbu oren, jackstand ijo :mky_07:

pingin nambah tw 40-220nm nanti kalo jadi bongkar kaki2 :mky_01:
sejauh mata mandang

ga ada ijo2 tekiro


bagus !!!!!!! :big_exellent: :big_exellent:
itu nylempit tang :wkkk: ijo2 mbah :mky_04:
Apprendre, c’est vivre
Top
User avatar
marmut
New Member of Mechanic Master
New Member of Mechanic Master
Posts: 11952
Joined: Wed Oct 16, 2013 6:27
Location: tangerang selatan

Re: Koleksi hand tools [Part 13]

Post by marmut »

DOHC wrote: Mon Jun 30, 2025 10:40

sejauh mata mandang

ga ada ijo2 tekiro


bagus !!!!!!! :big_exellent: :big_exellent:



matanya kelilipan isi bh.... :big_bored:
Top
User avatar
marmut
New Member of Mechanic Master
New Member of Mechanic Master
Posts: 11952
Joined: Wed Oct 16, 2013 6:27
Location: tangerang selatan

Re: Koleksi hand tools [Part 13]

Post by marmut »

eikazan wrote: Mon Jun 30, 2025 9:42 hentul.jpg
hasil berguru di tret hentul, join kubu biru :mky_08:

tapi dongbu oren, jackstand ijo :mky_07:

pingin nambah tw 40-220nm nanti kalo jadi bongkar kaki2 :mky_01:


:frm_tumbright: :frm_tumbleft:

40-220? belum lama milik saya pindah domisili dari tangsel ke pulau dewata.....

colek suhu
tohpati
Top
mkamil
Full Member of Senior Mechanic
Full Member of Senior Mechanic
Posts: 309
Joined: Tue Aug 06, 2019 14:02
Daily Vehicle: 1VD - L15Z - FB25

Re: Koleksi hand tools [Part 13]

Post by mkamil »

DOHC wrote: Mon Jun 30, 2025 10:40
eikazan wrote: Mon Jun 30, 2025 9:42 hentul.jpg
hasil berguru di tret hentul, join kubu biru :mky_08:

tapi dongbu oren, jackstand ijo :mky_07:

pingin nambah tw 40-220nm nanti kalo jadi bongkar kaki2 :mky_01:
sejauh mata mandang

ga ada ijo2 tekiro


bagus !!!!!!! :big_exellent: :big_exellent:
maha karya tekiro is my life... [emo-yesno] :ngacir: :ngacir:
Top
User avatar
Omnibus
New Member of Mechanic Master
New Member of Mechanic Master
Posts: 11846
Joined: Tue Apr 08, 2008 10:12

Re: Koleksi hand tools [Part 13]

Post by Omnibus »

DOHC wrote: Mon Jun 30, 2025 10:40
eikazan wrote: Mon Jun 30, 2025 9:42 hentul.jpg
hasil berguru di tret hentul, join kubu biru :mky_08:

tapi dongbu oren, jackstand ijo :mky_07:

pingin nambah tw 40-220nm nanti kalo jadi bongkar kaki2 :mky_01:
sejauh mata mandang

ga ada ijo2 tekiro


bagus !!!!!!! :big_exellent: :big_exellent:
mabok janda ngana ... :mky_02:
Top
User avatar
marmut
New Member of Mechanic Master
New Member of Mechanic Master
Posts: 11952
Joined: Wed Oct 16, 2013 6:27
Location: tangerang selatan

Re: Koleksi hand tools [Part 13]

Post by marmut »

mkamil wrote: Sat Jun 28, 2025 6:41 bare tool 900rban, bisa hex 1/4 atau sq.d 1/2, sebelumnya kepikiran dongcheng yg murmer :big_grin:

IMG_8787.jpeg
IMG_8788.jpeg
IMG_8821.jpeg



lumayan juga ya unit only harganya segitu. kaum kerehore tim dompet lipet 4 kaya saya pasti pikir².

numpang tanya, torsi yg tertera itu untuk clockwise atau counter clockwise?
saya pernah dapet info tp lupa dr mana kalo electric impact gun, angka yg tertera itu untuk clockwise.

mungkin pak guru suhu
Omnibus
dan paklik empu
singachu
bisa kasih pencerahan?
Top
mkamil
Full Member of Senior Mechanic
Full Member of Senior Mechanic
Posts: 309
Joined: Tue Aug 06, 2019 14:02
Daily Vehicle: 1VD - L15Z - FB25

Re: Koleksi hand tools [Part 13]

Post by mkamil »

marmut wrote: Tue Jul 01, 2025 7:04
mkamil wrote: Sat Jun 28, 2025 6:41 bare tool 900rban, bisa hex 1/4 atau sq.d 1/2, sebelumnya kepikiran dongcheng yg murmer :big_grin:

IMG_8787.jpeg
IMG_8788.jpeg
IMG_8821.jpeg



lumayan juga ya unit only harganya segitu. kaum kerehore tim dompet lipet 4 kaya saya pasti pikir².

numpang tanya, torsi yg tertera itu untuk clockwise atau counter clockwise?
saya pernah dapet info tp lupa dr mana kalo electric impact gun, angka yg tertera itu untuk clockwise.

mungkin pak guru suhu
Omnibus
dan paklik empu
singachu
bisa kasih pencerahan?
yang saya heran, gdx200 lebih mahal harganya, mungkin karena model lebih baru dan gdx285 ini bisa jadi akan discontinue.
kalau dari webnya sih, max 285nm tightening torque (clockwise), max 500nm breakaway torque (counter clockwise)
IMG_8876.jpeg
You do not have the required permissions to view the files attached to this post.
Top
henbob
Full Member of Senior Mechanic
Full Member of Senior Mechanic
Posts: 355
Joined: Thu Sep 26, 2019 7:33
Location: BSD-SBY

Re: Koleksi hand tools [Part 13]

Post by henbob »

mkamil wrote: Mon Jun 30, 2025 7:16
henbob wrote: Mon Jun 30, 2025 4:15
mkamil wrote: Sat Jun 28, 2025 6:41 bare tool 900rban, bisa hex 1/4 atau sq.d 1/2, sebelumnya kepikiran dongcheng yg murmer :big_grin:

IMG_8787.jpeg
IMG_8788.jpeg
IMG_8821.jpeg
cakep om, bongkar2 apa lagi om?
rotasi ban di subie lalu ganti rubber mount damper, rebound stop damper, ganti link stabilizer di honda, ciri khas penyakit honda

IMG_8821.jpeg
IMG_8837.jpeg
IMG_8835.jpegIMG_8864.jpeg
om itu subawunya udah pernah ganti busi ga om, susah ga om? :big_think:

stabiliser honda tu napa om? gampang ngeras om?

eikazan wrote: Mon Jun 30, 2025 9:42 hentul.jpg
hasil berguru di tret hentul, join kubu biru :mky_08:

tapi dongbu oren, jackstand ijo :mky_07:

pingin nambah tw 40-220nm nanti kalo jadi bongkar kaki2 :mky_01:
Asekk, makin lengkap tu om. yg blm warna merah om. hehe

ditunggu bongkar2 kakinya om


Abis pasang pegboard, mau ngerapiin dikit2 hentulnya. Jadi keliatan belang2 merk n warna hentulnya :big_peace: wkwkwk
You do not have the required permissions to view the files attached to this post.
Top
DOHC
Full Member of Mechanic Master
Full Member of Mechanic Master
Posts: 27673
Joined: Sat Jan 31, 2009 17:48
Location: in engine bay with carbonfibre as roof

Re: Koleksi hand tools [Part 13]

Post by DOHC »

henbob wrote: Wed Jul 02, 2025 9:11


Abis pasang pegboard, mau ngerapiin dikit2 hentulnya. Jadi keliatan belang2 merk n warna hentulnya :big_peace: wkwkwk
sejauh mata liat

kayanya ga ada tekiro

baguss !!! :big_exellent: :big_exellent:
numpang lewat aja.... :ngacir: :ngacir:
Top
mkamil
Full Member of Senior Mechanic
Full Member of Senior Mechanic
Posts: 309
Joined: Tue Aug 06, 2019 14:02
Daily Vehicle: 1VD - L15Z - FB25

Re: Koleksi hand tools [Part 13]

Post by mkamil »

henbob wrote: Wed Jul 02, 2025 9:11
mkamil wrote: Mon Jun 30, 2025 7:16
henbob wrote: Mon Jun 30, 2025 4:15

cakep om, bongkar2 apa lagi om?
rotasi ban di subie lalu ganti rubber mount damper, rebound stop damper, ganti link stabilizer di honda, ciri khas penyakit honda

IMG_8821.jpeg
IMG_8837.jpeg
IMG_8835.jpegIMG_8864.jpeg
om itu subawunya udah pernah ganti busi ga om, susah ga om? :big_think:

stabiliser honda tu napa om?
belum pernah karena belum saatnya ganti, masih lama sih harusnya nanti di 100k kalau lihat maintenance schedule, sekarang baru 32k.

rubber boots di link stabilizer kanan kiri sudah pecah keluar2 grease nya jadi ganti aja, tapi uniknya cuma bagian atas baik itu kanan dan kiri. kalau rubber bushing stabilizer saya check masih aman walau sudah 9 tahun 72k
Top
DOHC
Full Member of Mechanic Master
Full Member of Mechanic Master
Posts: 27673
Joined: Sat Jan 31, 2009 17:48
Location: in engine bay with carbonfibre as roof

Re: Koleksi hand tools [Part 13]

Post by DOHC »

masi pej 50an rupanja..

saat nya kuarin koleksi kita orang ahh

judul nya deep throat soket 3 per 8 in drive, tp versi bodi ga full silindris, alias stenga silinder, stenga ngotak

tujuan nya biar bsa ditandem ama konci pas

entah maksut sebenernya apa ini si fabriekan bkin kaya gini, kita orang jg ga ngerti
You do not have the required permissions to view the files attached to this post.
Last edited by DOHC on Wed Jul 02, 2025 12:47, edited 1 time in total.
numpang lewat aja.... :ngacir: :ngacir:
Top
DOHC
Full Member of Mechanic Master
Full Member of Mechanic Master
Posts: 27673
Joined: Sat Jan 31, 2009 17:48
Location: in engine bay with carbonfibre as roof

Re: Koleksi hand tools [Part 13]

Post by DOHC »

lanjoot

kl yg ini masi dari merk yg sama, deep throat soket , tp yg impek punja, ukuran 1 per 2 in drive

kliatan yg paling sering kita orang pake nomer 14 , 17, ama 19

ud diuji kekuatan nya buat hajar buka baut kruk as honda yg bahlul itu, ga masalah
You do not have the required permissions to view the files attached to this post.
numpang lewat aja.... :ngacir: :ngacir:
Top
mkamil
Full Member of Senior Mechanic
Full Member of Senior Mechanic
Posts: 309
Joined: Tue Aug 06, 2019 14:02
Daily Vehicle: 1VD - L15Z - FB25

Re: Koleksi hand tools [Part 13]

Post by mkamil »

DOHC wrote: Wed Jul 02, 2025 12:38 lanjoot

kl yg ini masi dari merk yg sama, deep throat soket , tp yg impek punja, ukuran 1 per 2 in drive

kliatan yg paling sering kita orang pake nomer 14 , 17, ama 19

ud diuji kekuatan nya buat hajar buka baut kruk as honda yg bahlul itu, ga masalah
wadaaww merah merah milwaukee :big_exellent:
Top
DOHC
Full Member of Mechanic Master
Full Member of Mechanic Master
Posts: 27673
Joined: Sat Jan 31, 2009 17:48
Location: in engine bay with carbonfibre as roof

Re: Koleksi hand tools [Part 13]

Post by DOHC »

mkamil wrote: Wed Jul 02, 2025 12:44
DOHC wrote: Wed Jul 02, 2025 12:38 lanjoot

kl yg ini masi dari merk yg sama, deep throat soket , tp yg impek punja, ukuran 1 per 2 in drive

kliatan yg paling sering kita orang pake nomer 14 , 17, ama 19

ud diuji kekuatan nya buat hajar buka baut kruk as honda yg bahlul itu, ga masalah
wadaaww merah merah milwaukee :big_exellent:
buatan cina punya koq :big_blushing: :big_blushing:
numpang lewat aja.... :ngacir: :ngacir:
Top
User avatar
Omnibus
New Member of Mechanic Master
New Member of Mechanic Master
Posts: 11846
Joined: Tue Apr 08, 2008 10:12

Re: Koleksi hand tools [Part 13]

Post by Omnibus »

DOHC wrote: Wed Jul 02, 2025 12:38 lanjoot
kita orang demen nih liat yg american style :big_exellent:

saking banyaknya merk2 "pendatang baru" terus yg nongol

.... :ngacir:
Top

Return to “Public's Lounge”